Naomi - Buffer Bit - Extra Fine
Couldn't load pickup availability
Naomi Buffer Bit – Extra Fine
The Naomi Buffer Bit – Extra Fine is a precision tool designed for the most delicate stages of nail prep and finishing. Made from high-grade Tungsten Carbide and coated in PVD Gold, it is more durable, resistant to heat, and longer-lasting than standard gold coatings.
With a dual-textured surface combining fine grit on one side and extra fine grit on the other, this bit is perfect for gentle natural nail preparation, removing non-living tissue with ease, and achieving a smooth, flawless finish around the cuticle and sidewalls. Its small head allows you to work into hard-to-reach areas with complete control, while the extra fine surface makes it safe for refining and perfecting even the most sensitive nails.
Key Features
-
Dual-textured surface – fine (prep) + extra fine (finishing)
-
PVD Gold coating – tougher, longer-lasting, and heat-resistant compared to standard gold
-
Small head – precision access to tight areas
-
Extra fine grit – perfect for gentle finishing and removing non-living tissue
-
High-grade Tungsten Carbide – ultra-durable, rust-proof
-
Sterilisation-friendly – alcohol wipe & autoclave-safe (up to 120°C)
-
Ergonomic anti-slip design – secure and comfortable handling
Ideal For
✔ Gentle natural nail prep
✔ Removing non-living tissue delicately
✔ Light etching to improve gel adhesion
✔ Refining and smoothing product edges
✔ Blending extension tips seamlessly
✔ Neatening cuticle and sidewalls for a flawless finish
How to Use
Fine Side (Prep):
-
Use to lightly etch the nail plate
-
File in one direction only (no back-and-forth)
-
Limit to 5–8 seconds per nail
Extra Fine Side (Finishing):
-
Perfect for smoothing and refining product edges
-
Use gentle circular motions around cuticle and sidewalls
-
Buff out any minor imperfections for a clean, natural finish
💡 Top Tip: After applying product (new set or infill), use the extra fine side around the cuticle and down the sidewalls to achieve a perfectly neat, salon-quality finish.
⚠ Critical Warnings:
-
Avoid use on overly thin nails (<0.3mm)
-
Do not apply to damaged skin or cuticle
-
Not suitable on uncured gel polish
Safety & Care
Cleaning & Maintenance:
-
Sterilise after use
-
Autoclave-safe (<120°C for 15 minutes)
-
Store dry and away from other tools to prevent wear
Lifespan:
Replace once >30% of grit texture wears or shiny patches appear.
Troubleshooting / FAQ
❓ White streaks after filing?
Cause: Too much pressure → Fix: Reduce pressure and refine with extra fine side
❓ When to replace?
When grit wears down (>30%) or shiny metal is visible
❓ Autoclave-safe?
Yes – up to 120°C for no longer than 15 minutes
This product contains HEMA, do not use on those with a HEMA or acrylate sensitivity.
Always wear non permeable, nitrile gloves when handling any UV gel product.
Only apply to healthy nails.
Apply in thin coats, do not overload the brush. Thick coats of product will not cure sufficiently. The more pigmented the colour, the thinner the coat should be.
Avoid all contact with skin. If contact with skin occurs, remove immediately.
Do not cure nails with product on the skin.
Use a 36W UV/LED lamp with a minimum of 365 + 405 nanometers to cure. Cure each coat for 60 seconds. If hands are removed from the lamp during curing, always make up lost seconds with another round of curing. It is not possible to over cure this product.
Remove gloves using a 'no touch method' i.e. do not pull from the fingertips where you could touch transferred product, pull down from the wrist, turning the glove inside out and dispose of in general waste. Always use a fresh pair of gloves for each client.
Always wash both yours and client's hands after application of final top coat and before use of cuticle oil.
Our products are for use by qualified nail professionals only.
Ingredients:
Di-HEMA Trimethylhexyl Dicarbamate, HEMA, Hydroxypropyl Methacrylate, Ethyl Trimethybenzoyl Phenylphosphinate, Hydroxycyclohexyl Phenyl Ketone,
May Contain (+/-) CI 77266, CI 77891, CI 73360, CI 15880, CI 74160, CI 74260, CI 19140, CI 60725,
CI 77007, Aluminium Powder, Mica (CI 77019)
The TWENTY Professional Smart Lamp has been meticulously designed to fully cure all products in the collection.
Cure each coat for 60 seconds. If hands are removed from the lamp during curing, always make up lost seconds with another round of curing. It is not possible to over cure this product.
PAT test your lamp annually and check daily that all bulbs are in good working order and free from cured gel residue.
Our products have also been tested with the SunUV range of lamps.
- Finish with TWENTY Glass No-Wipe Top Coat
- Use a cuticle oil daily to prevent lifting and chipping
- Avoid swimming and hot tubs for 48 hours after application
- Use gloves when cleaning with harsh chemicals to protect nails
- Do not pick at polish, this may cause damage to the natural nail.
- Do not use nails as tools, this can cause damage to the natural nail.
We begin preparing your goods as soon as your order is received. All orders are shipped within 24 hours of your order being placed (Monday - Friday).
Delivery Prices:
UK Mainland:
1 - 3 business days - £5.99
Northern Ireland / Republic of Ireland:
1 - 3 business days - £7.99
UK Mainland / Northern Ireland / Republic of Ireland orders over £150:
1 - 3 business days - Free
Europe:
2 - 11 business days - £12.99
Europe orders over £200:
2 - 11 business days - Free
USA:
1 - 3 business days - $7.99
USA orders over $150:
1 - 3 business days - Free
Rest of the World:
3 - 17 business days - £24.99
Rest of the World orders over £200:
3-17 business days - Free
*Please note, local customs charges may apply.